Murphy powerview 101 manual

[Mutka]

.
.
Download / Read Online Murphy powerview 101 manual >>
http://www.fqf.cloudz.pw/download?file=murphy+powerview+101+manual
.
.
.

<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
.
Top element. Engine and Transmission Parameters . Navigation and Keypad Functions . The latest version of this manual can be found at Disconnect all electrical power to the machine. Make sure the machine cannot operate during installation. Follow all safety warnings of the machine manufacturer. Read and follow all installation instructions. When Menu is touched, the Main menu items display. Touch the Arrow Keys to move the selection bar to other menu items. Scroll to the top or bottom item on the current page to see other menu items on additional pages. When the desired item is highlighted by the cursor, touching Enter selects that item and displays the corresponding screen. First Time Start Up When power is first applied to the display, the Murphy logo is displayed. Engine manufacturers typically recommend against starting the engine while this message is showing. Once the ECU stops broadcasting the message, this screen is no longer displayed. Once the engine has started, the single engine parameter is displayed with the engine RPM. Touching the Right Arrow Key displays the coolant temperature. The screen can be changed to other parameters by touching Menu. Murphy products are compliant with requirements for U. Unless selected in the OEM Menu, DPF REGEN does not display in the Main Menu. When inhibit is no longer needed, you can select a different option. The following ISO symbols indicate regen status. DPF Regen ISO Symbols Icon Description. An asterisk to the right of the language indicates it is selected. Stored Codes Select this and PowerView requests and displays stored fault codes from the engine ECU. UP DISPLAY, and then touch Enter. Engine Load at Current RPM, Coolant Temperature, and Oil Pressure. Selected parameters are indicated by a number to the right of it. The numbers represent the order in which the parameters will be displayed. To deselect a parameter and remove it from the list of displayed parameters, highlight the parameter and touch Enter. Each option can place parameter data into one of four areas on the screen known as quadrants. Use the Arrow Keys to select which quadrant to edit. Once you select a quadrant, touch Enter and you move to a list of parameters. Use the Arrow Keys to highlight the new parameter to be placed in the selected quadrant. Service Reminders are internal reminders within PowerView. Once a Service Reminder is active, warnings will show SPN 916 and FMI 17. If you select Modify Reminders, use the Arrow Keys to highlight the Reminder to modify and touch Enter. The Reminder name appears at top screen. Bottom screen shows Cancel and Save. Use the Arrow Keys to brighten or darken the backlight intensity. Utilities Menu UTILITIES is the last item on the Main Menu. The Utilities menu provides troubleshooting features and other information about the PowerView configuration. Gage Data View data for optional connected PVA gages. When Slave Active is enabled, gage data is not available. Remove All Gages Reset the gage memory on the PowerView. Edit the J1939 fault code version. Use the Arrow Keys to move between Versions, and then touch Enter to select a version. There are four methods for converting fault codes. Murphy fuel sender is available. Engine Speed Control This option must be ON in the OEM Menu for functionality to be available from the Utilities Menu. From the Engine Speed Control screen, touch Enter to reach the Speed Control screen. Arrow Key to increase or left Arrow key to decrease the throttle setting. Left Arrow Key to increment the number and the Right Arrow Key to move to the next numeric position. If the Murphy standard key does not work, contact the OEM from whom the engine or machine was purchased. Highlight your selection and touch Enter. If in Slave Active, select SERIAL PORT SETUP and touch Enter. Select Engine ECU Highlight Select Engine ECU and touch Enter. This message indicates the PV101 is listening to all devices on the network. Set Source Address Allows setting the source claim address for the PowerView on the CAN Network. Options are Auto Claim or 0 to 253. Restore All Defaults PowerView automatically resets after the restore defaults is complete. RESTORING ALL FACTORY DEFAULTS displays when this is selected. Modifying fuel setpoints is a complex process. OFF This option must be ON in the OEM Menu for functionality to be available in the Utilities Menu. Auxiliary Gage Fault Murphy PVA Gages can be attached to the PowerView. NO GAGE DATA is displayed The PowerView has no record of gages connected to the RS485 bus. Technical Support team to further troubleshoot any issues. Other third party product or trade names referenced herein are the property of their respective owners and are used for identification purposes only. The Modifications Insert contains information about Version 2. A that was shipped after December 16, 2011, please review the information in this document. Chinese, Japanese, Czech and Russian. The ability to select CAN bus Dat filexlib.
.
Murphy powerview 101 manualidades <br> Murphy powerview 101 handbuch<br>Murphy powerview 101 manuaalinen <br> Murphy powerview 101 manually<br>Murphy powerview 101 manual lawn

[投稿者]

投稿